Sony CMT-CP333 Operating Instructions - Page 7
Inserting two size-AA (R6) batteries into the remote control, Setting the time
View all Sony CMT-CP333 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 110V-120V 220V-240V VOLTAGE SELECTOR 4 Connect the power cord to a wall outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To turn on the system, press @/1. Inserting two size-AA (R6) batteries into the remote control Setting the time 1 Turn on the system. 2 Press TIMER SET on the remote. If you are setting the clock for the first time, go to step 5. 3 Press ./> on the remote repeatedly until "CLOCK" appears in the display. 4 Press ENTER on the remote. The hour indication flashes. 5 Press ./> on the remote repeatedly to set the hour. 6 Press ENTER on the remote. The minute indication flashes. 7 Press ./> on the remote repeatedly to set the minute. 8 Press ENTER on the remote. The clock will begin operating. To reset the system clock Start over from step 1. e EE e Tip When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion. Saving power in standby mode Press DISPLAY on the remote repeatedly while the system is turned off. The system switches as follows: Clock display y Power Saving Mode 7