Sony CMT-CP333 Operating Instructions - Page 19

Optional Components Hooking up the optional components You can connect a variety of components to your system in order to enhance it. Make sure that the color of the plugs matches that of the connectors. To the audio output jacks on your MD deck/VCR Tip If you cannot select "VIDEO" by turning FUNCTION (or press FUNCTION on the remote repeatedly), press @/1 while pressing down DSG in standby mode. The function will change from "MD" to "VIDEO", and "VIDEO" will appear in the display. To change back to "MD", repeat this procedure. Optional Components To the digital input connector on your MD deck* * If the jack is covered with a cap, remove it before use. To Make a digital recording from CD to MD Listen to the connected MD deck Listen to the connected VCR Do This Connect an optical cable. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until "MD" appears in the display. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until "VIDEO" appears in the display. 19