Sony CMT-SV2D CMTDV2D Instructions (main component system) - Page 32

Timer Falling asleep to music - Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90 t 80 t 70 t ... t 10 t OFF * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. Other operations To Press Check the SLEEP once. remaining time* Change the time SLEEP repeatedly to select the to turn off time you want. Cancel the Sleep SLEEP repeatedly until "SLEEP Timer Function OFF" appears. * You cannot check the remaining time if you select "AUTO". Note Do not set to "AUTO" during Synchro Recording on a tape. Tip You can use the Sleep Timer, even if you have not set the clock. Waking up to music - Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 11). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. • DVD: Load a disc. • Tape: Load a tape. • Tuner: Tune in the preset radio station (see "Listening to the radio" on page 26). 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly to select "PLAY SET", then press ENTER. "ON" appears and the hour indication flashes. 4 Set the time to start playing. Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER. 5 Set the time to stop playing following the same procedure as step 4. 6 Press . or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y DVD PLAY T t TAPE PLAY T 7 Press ENTER. The type of timer ("PLAY TIMER"), the start time, the stop time, and the sound source appear in turn, before the original display returns. 8 Press VOLUME + or - to adjust the volume. 9 Press ?/1 to turn off the system. 32GB