Sony CMT-SV2D CMTDV2D Instructions (main component system) - Page 38
Listening to audio from a connected component
View all Sony CMT-SV2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Listening to audio from a connected component Use buttons on the unit for the operation. 1 Connect audio cords. See "Hooking up optional components" on page 37. 2 Press TV to switch the function to TV. 3 Start playing the connected component. Enjoying the 5.1 channel sound with the optional amplifier 1 Connect a digital optical cord. See "Hooking up optional components" on page 37. 2 Connect 6 speakers to an AV amplifier equipped with a decoder. For the speaker placement, refer to the operating instructions supplied with the connected amplifier. 3 Press DVD SETUP in stop mode. The Setup Display appears. 4 Press < or , repeatedly to select "AV", then press ENTER. 5 Press M or m repeatedly to select "Dolby Digital" or "DTS", then press ENTER. 6 Press M or m repeatedly to select "Bit Stream", then press ENTER. 7 Press DVD SETUP to turn off the Setup Display. 8 Switch the output to 5.1 channel Dolby Digital sound or 5.1 channel DTS sound. See "Changing the sound/subtitle/angle" on page 19. Note If "Dolby Digital" or "DTS" is set to "Bit Stream", sound is not output from the supplied speakers and optional headphone does not function. 38GB