Sony CMT-SV2D CMTDV2D Instructions (main component system) - Page 34

Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "REC SELECT" appears, then press ENTER. Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "TIMER OFF" appears, then press ENTER. Notes • You cannot activate the Play Timer and Rec Timer at the same time. • If you use the Rec Timer and the Sleep Timer at the same time, the setting with the earlier end time has priority. • The system turns on 15 seconds before the preset time. Do not operate the system from the time the system turns on until the play starts. • If the system is on 15 seconds before the preset time, the Rec Timer will not be activated. • The volume is reduced to minimum during recording. • Note that if the Rec Timer is set at the same time as the Play Timer sound source is set to tape, the Rec Timer sound may be recorded onto the tape. Display Turning off the display - Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Tips • The timer continues to operate in Power Saving Mode. • ?/1 indicator lights up even in Power Saving Mode. Adjusting the brightness of the indicators Press DIMMER repeatedly. Each time you press the button, the setting changes cyclically as follows: DIMMER OFF t DIMMER 1 t DIMMER 2* * DIMMER 2 is the darkest. 34GB