Sony CMT-SV2D CMTDV2D Instructions (main component system) - Page 9

Plug type B AM loop antenna (For other models) Connect the video input jack of your TV to the VIDEO OUT jack with the video cable (supplied)*. Getting Started Extend the FM lead antenna horizontally Plug type C AM loop antenna * except for European and Russian models When using a TV Turn on the TV and select the video input so that you can view the pictures from this system. When connecting a video deck Connect the TV and the video deck using video and audio cords (not supplied) as shown below. TV Extend the FM lead antenna horizontally North American model: Connect white side. Other models: Connect brown side. Note Keep the antennas away from the speaker cords. 3 (For European and Russian models) Connect the t INPUT jack of your TV to the T LINE-TV jack with the SCART cord (not supplied). When you connect using the SCART cord, check that the TV conforms to RGB signals. If the TV conforms to RGB signals, change the input mode of the TV to RGB signals. Refer to the operating instructions supplied with the TV to be connected. Video deck System Do not connect directly. If you connect a video deck between this system and the TV, you may experience video leakage when watching the video signal from this system. Do not connect a video deck between this system and the TV. Note Do not place the TV on this system. 4 For models with a voltage selector, set the VOLTAGE SELECTOR to the local power line voltage. Depending on the model, the VOLTAGE SELECTOR may differ. 110-120V 220-240V continued 9GB