Sony CMT-X3CD Operating Instructions - Page 17
Listening to music through a registered device, To cancel the pairing operation
View all Sony CMT-X3CD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Note The operations described above may not be available for certain BLUETOOTH devices. In addition, the actual operations may differ depending on the connected BLUETOOTH device. Once a pairing operation is performed, it does not have to be performed again. In the following cases, however, a pairing operation must be performed again: Pairing information was erased when the BLUETOOTH device was repaired. You attempt to pair the system with more than 8 BLUETOOTH devices. This system can pair with up to 8 BLUETOOTH devices. If you pair another BLUETOOTH device after pairing with 8 devices was performed, pairing information of the device that was connected with the system first is overwritten with that of the new device. Pairing registration information of this system is erased from the connected device. If you initialize the system or erase the pairing history with the system, all the pairing information will be erased. The sound of this system cannot be sent to a BLUETOOTH speaker. "Passkey" may be called "Passcode," "PIN code," "PIN number" or "Password," etc. You cannot make a BLUETOOTH connection with another BLUETOOTH device while the BLUETOOTH connection is established with one BLUETOOTH device. Cancel the connection first, and then connect with another device. The system supports only Sub Band Codec. To cancel the pairing operation with the BLUETOOTH device Press BLUETOOTH MENU , BLUETOOTH or change the source. Tip When the system has no pairing information, the pairing operation cannot be canceled. To cancel the connection with the BLUETOOTH device Press BLUETOOTH MENU and to select "DISCONNECT," then press . Tip You can also disconnect the BLUETOOTH connection from the BLUETOOTH device. To erase the pairing registration information 1 Press BLUETOOTH . 2 Press and hold FUNCTION and on the unit at the same time until "RESET" appears on the display window . Note If you have erased the pairing information, you cannot make a BLUETOOTH connection unless pairing is performed again. Listening to music through a registered device After step 1 on "Pairing the system with a BLUETOOTH device and listening to music," operate the BLUETOOTH device to connect with the system, then press to start playback. 17GB Listening to music through a BLUETOOTH connection