Sony CMT-X3CD Operating Instructions - Page 22
To check the setting, To cancel the timer, Press, to select PLAY, SET, then press, to select time
View all Sony CMT-X3CD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3 Press to select "PLAY SET," then press . The start time flashes in the display window . The timer setting appears in the display window . To cancel the timer Select "OFF" in step 3 of "To check the setting" (page 22). 4 Press to select time, then press . Follow the same procedure to set "MINUTE" of the time to start operation, then "HOUR" and "MINUTE" of the time to stop the operation. 5 Press to select the desired sound source, then press . The confirmation display for the Play Timer appears. 6 Press to turn off the system. Tip When the sound source is a radio, make sure to tune-in to the radio station before turning off the system (page 12). To change the timer setting, perform the procedures from the beginning again. Note The system turns on exactly at the time set in Play Timer. When the sound source is a CD, MP3/WMA disc or USB, it may take some time to start playback. The Play Timer does not work if the system is already on at the preset time. When the sound source for a Play Timer is set to a radio station, the last played frequency is used for a Play Timer. If you change the radio frequency after setting the timer, the radio station setting for the timer will also be changed. To check the setting 1 Press TIMER MENU . 2 Press to select "SELECT," then press . 3 Press to select "PLAY SEL," then press . 22GB