Sony CPD-100VS Operating Instructions (primary manual) - Page 20
Power, Saving, Function
View all Sony CPD-100VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
11§ Power Saving Function This monitor meets the power saving guidelines set by the International ENERGY STAR Program. It is capable of reduced power consumption when used with a computer equipped with Display Power Management Signaling (DPMS). By sensing the absence of the sync signal coming from the computer, it will reduce the power consumption as follows: V CAUTION The Power Saving function will automatically put the monitor into Active-off state if the power switch is turned on without any video signal input. Once the horizontal and vertical syncs are sensed, the monitor will automatically return to its Normal operation state. State Power consumption Normal operation 130 W (max) 2 Suspend (1st step 15 W (max)1) of power saving) 3 Active-off (2nd step of power saving) 8 W (max) 4 Power-off Approx. 6 W1 Required (I) Power resumption time indicator Green Speaker On Approx. 3 sec. Green Orange Approx. 10 sec. Orange Offs) Off2 Off Off Notes 1) When the audio circuitry is inactive. 2) The audio circuitry will constantly be active as long as the monitor keeps receiving the audio signal including noise. When the audio signal is completely shut down, the audio circuitry will be automatically turned off after 30 seconds. Once turned off, the audio circuitry will not be active again until the monitor returns to its Normal operation state. 3) To lower the power consumption to 0 W, disconnect the power cord. 20 Power Saving Function