Sony CPD-100VS Operating Instructions (primary manual) - Page 6
Warning, Power, Connection
View all Sony CPD-100VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Warning on Power Connection • Use only the supplied power cord. If you do not, this monitor may not conform to mandatory FCC standards. • Before disconnecting the power cord, wait at least 30 seconds after turning off the power switch to discharge static electricity from the CRT display surface. • After the power has been turned on, the CRT is demagnetized for approximately 5 seconds. This generates a strong magnetic field around the bezel which may affect the data stored on magnetic tape or disks near the bezel. Place such magnetic recording equipment and tapes/disks at a distance from this unit. The socket-outlet shall be installed near the equipment and shall be easily accessible. 6 Precautions
Warning
on
Power
Connection
•
Use
only
the
supplied
power
cord.
If
you
do
not,
this
monitor
may
not
conform
to
mandatory
FCC
standards.
•
Before
disconnecting
the
power
cord,
wait
at
least
30
seconds
after
turning
off
the
power
switch
to
discharge
static
electricity
from
the
CRT
display
surface.
•
After
the
power
has
been
turned
on,
the
CRT
is
demagnetized
for
approximately
5
seconds.
This
generates
a
strong
magnetic
field
around
the
bezel
which
may
affect
the
data
stored
on
magnetic
tape
or
disks
near
the
bezel.
Place
such
magnetic
recording
equipment
and
tapes/disks
at
a
distance
from
this
unit.
The
socket
-outlet
shall
be
installed
near
the
equipment
and
shall
be
easily
accessible.
6
Precautions