Sony CSS-HD1 Instruction Manual - Page 15
Troubleshooting, 1´-GB - compatible
UPC - 027242701175
View all Sony CSS-HD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Troubleshooting If any problems occur with your products, refer to the following solutions. If the problem persists, contact your Sony dealer. Symptom Cause/Solution Unable to charge the battery pack (when The camera is turned on. the CHARGE lamp fails to light) Turn the camera off. The AC Adaptor is disconnected. Connect the AC Adaptor properly. The camera is not placed on the Cyber-shot Station correctly. Place the camera correctly. The battery pack is not installed correctly. Install the battery pack correctly. The battery pack is completely charged. The battery pack installed into the camera is inapplicable. Install the battery pack compatible with your camera. The CHARGE lamp blinks fast, or blinks The battery pack installed into the camera is inapplicable. for more than 10 seconds Install the battery pack compatible with your camera. The connection is not correct. Remove the camera from the Cyber-shot Station and reconnect the AC Adaptor. After the CHARGE lamp goes off, place the camera on the Cyber-shot Station. Unable to turn on the camera, or it suddenly gets turned off The camera is not placed on the Cyber-shot Station correctly. Place the camera correctly. The AC Adaptor is disconnected. Connect the AC Adaptor properly. The images/sounds cannot be played back on a TV The connection is not correct. The audio cannot be output when only the Component video cable is connected. Connect the AV connecting cable to the audio jack correspond to the component video jack. The Component video out setting of the camera is not correct. Refer to the operating instructions supplied with the camera, and set the [COMPONENT] setting correctly. The images cannot be output via the AV The Component video cable is connected to the connecting cable Cyber-shot Station and the TV. Unplug the Component video cable from the Cyber-shot Station. Buttons on the remote control do not work, and no operations can be performed The AC Adaptor is disconnected. Connect the AC Adaptor properly. The battery in the remote control is dead. Replace the battery with a new one. Unable to attach the camera on the Cyber-shot Station The MODEL SELECT switch is not set to its designated position. Set the MODEL SELECT switch to the designated position. 15-GB