Sony DCR-HC65 Camera Operations Guide - Page 87
Data Code, Remaining, Remote Ctrl, Rec Led, Using The Menu
View all Sony DCR-HC65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using the Menu DATA CODE GOFF DATE/TIME CAMERA DATA Select not to display date, time and the camera settings data during playback. Select to display the date and time during playback (p. 57). Select to display the camera settings data during playback (p. 57). REMAINING GAUTO ON REMOTE CTRL Select to display the remaining tape indicator for about 8 seconds: • After you select the CAMERA-TAPE mode with the cassette inserted, and your camcorder calculates the remaining amount of tape. • When you touch (play/pause). Select to always display the remaining tape indicator. REC LED GON OFF Select when using the Remote Commander supplied with your camcorder. Select to deactivate the Remote Commander to prevent your camcorder from responding to a command sent by another VCR remote control unit. b Note • The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. GON OFF Select to turn on the camera recording lamp on the front of your camcorder during recording. Select this setting in the following recording situations. The camera recording lamp will not light up during recording. • When you do not want the subject to be nervous about being recorded. • When you are recording close to the subject. • When the subject reflects the recording lamp. ,continued Using the Menu 87