Sony DCRVX2000 Operating Instructions - Page 151
Symptom, Cause and/or Corrective Actions, Set it to OFF CHG.
UPC - 027242572874
View all Sony DCRVX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Troubleshooting Symptom The Remote Commander supplied with your camcorder does not work. The picture from a TV or VCR does not appear even when your camcorder is connected to outputs on the TV or VCR. The melody or beep sounds for five seconds. When charging the battery pack, no indicator appears or the indicator flashes on the display window. You cannot charge the battery pack. The camcorder is immediately turned off even if the amount of the battery remaining time is enough to operate. No function works though the power is on. Cause and/or Corrective Actions • COMMANDER is set to OFF in the menu settings. c Set it to ON. (p. 107) • Something is blocking the infrared rays. c Remove the obstacle. • The batteries are inserted in the battery holder with the + - polarities incorrectly. c Insert the batteries with the correct polarity. (p. 168) • The batteries are dead. c Insert new ones. (p. 168) • DISPLAY is set to V-OUT/LCD in the menu settings. c Set it to LCD. (p. 107) • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize. (p. 156) • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. • The AC power adaptor is disconnected. c Connect it properly. • The battery pack malfunctions. c Contact your Sony dealer or local authorized Sony service facility. • The POWER switch is not set to OFF (CHG). c Set it to OFF (CHG). c Charge the battery pack fully again. The correct remaining time is displayed. c Disconnect the power cord of the AC power adaptor or remove the battery, then reconnect it after about one minute. Turn the power on. If the functions still do not work, press the RESET button located at the lower-right of the ZEBRA selector using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) (p. 13, 163) Additional Information 151