Sony DCRVX2000 Operating Instructions - Page 63

Advanced Playback Operations - Advanced Playback Operations - Quickly locating a scene using the zero set memory function Using the zero set memory function, your camcorder rewinds or advances the tape to locate the desired scene, and the searching automatically stops at the scene having a tape counter value of "0:00:00." You can do this with the Remote Commander. (1) In playback mode, press DISPLAY if the counter is not on the LCD screen or in the viewfinder. (2) Press ZERO SET MEMORY at the point you want to locate later. The tape counter shows "0:00:00" and the ZERO SET MEMORY indicator flashes. (3) Press x when you want to stop playback. (4) Press m to rewind the tape to the tape counter's zero point. The tape stops automatically when the tape counter reaches approximately zero. The ZERO SET MEMORY indicator disappears and the time code appears. (5) Press N. Playback starts. DISPLAY m ZERO SET MEMORY N x Notes •When you press ZERO SET MEMORY again before rewinding the tape, the zero set memory function will be canceled. •There may be a discrepancy of several seconds from the time code. When there is a blank portion between pictures on a tape The zero set memory function may not work. ZERO SET MEMORY functions also in standby mode When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at the point you want to end the insertion. Rewind the tape to the insert start point, and start recording. Recording stops automatically at the tape counter zero point. Your camcorder returns to standby mode. 63