Sony DCRVX2000 Operating Instructions - Page 28
Using the data code function, Recording data
UPC - 027242572874
View all Sony DCRVX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Playing back a tape Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Press DATA CODE on the camcorder or on the Remote Commander supplied with your camcorder in playback mode. The display changes as follows: date/time t various settings (SteadyShot, white balance, gain, shutter speed, aperture value, exposure mode) t no indicator Date/time Various settings JUL 4 2000 12:05:56 AM [a] [b] AUTO 60 AWB F1.6 0dB [c] [d] [e] [f] [a] SteadyShot OFF indicator [b] Exposure mode/PROGRAM AE mode indicator [c] White balance indicator [d] Gain indicator [e] Shutter speed indicator [f] Aperture value To not display the various settings Set DATA CODE to DATE in the menu settings (p. 107). The display changes as follows: date/time y no indicator Recording data Recording data is your camcorder's information when you have recorded something. In CAMERA mode, the recording data will not be displayed. When you use the data code function date) or time) appears if: - A blank portion of the tape is being played back. - The tape is unreadable due to tape damage or noise. - The tape was recorded by the camcorder without the date and time set. Data code When you connect your camcorder to the TV, the data code also appears on the TV screen (p. 30). Note on the date/time indicator Recording date/time is not displayed during shooting, however, it is automatically recorded on the tape. You can check the recording date/time during playback by pressing DATA CODE. If the exposure adjustment is set to minimum "CLOSE" is displayed at the location of the aperture value. 28