Sony DCRVX2000 Operating Instructions - Page 84

Dubbing only desired scenes - Digital program editing (6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander. The CUT-IN point of the first program is set, and the top part of the program mark changes to light blue. (7) Search for the end of the first scene you want to insert using the video operating buttons, then pause playback (p. 29). (8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander. The CUT-OUT point of the first program is set, then the bottom part of the program mark changes to light blue. (9) Repeat steps 5 to 8, then set the program. When the program is set, the program mark changes to light blue. You can set a maximum of 20 programs. 7 6 STOP REW PLAY FF PAUSE V I DEO ED I T MARK UNDO ERASE ALL START 0:08:55:06 1 OUT TOTAL SCENE 0:00:00:00 0 [MENU] : END 8,9 V I DEO ED I T MARK UNDO ERASE ALL START 0:09:07:06 2 IN TOTAL SCENE 0:00:12:13 1 [MENU] : END V I DEO ED I T MARK UNDO ERASE ALL START 0:10:01:23 4 IN TOTAL SCENE 0:00:47:12 3 [MENU] : END On a blank portion of the tape You cannot set CUT-IN or CUT-OUT on a blank portion of the tape. Note The total time of the programs is indicated on the LCD screen or in the viewfinder, however, if the time code on the tape is not continuous, the time may not be indicated properly. Erasing the last program To change the end of the last program, delete the CUT-OUT mark. To erase the whole program, delete both the CUT-IN and CUT-OUT marks. (1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. The last set program mark flashes. (2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the setting is canceled. To cancel erasing Select RETURN in step 2, then press the SEL/PUSH EXEC dial. Erasing all programs (1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select ERASE ALL, then press the dial. All the program marks flash. (2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the 84 settings are canceled.