Sony DSCU60 Operating Instructions - Page 61

Troubleshooting, tipped object, then close the cover

Page 61 highlights

Troubleshooting If you experience trouble with your camera, try the following solutions. 1 First check the items on the tables below. If code "C:ss:ss" is displayed on the LCD screen, the selfdiagnosis display function is working (page 70). Troubleshooting 2 Should your camera still not work properly, open the waterproof cover to press the RESET button using a finetipped object, then close the cover and turn on the power again. (All the settings including date and time are cleared.) 3 Should your camera still not work properly, consult your Sony dealer or local authorized Sony service facility. RESET button Troubleshooting Batteries and power Symptom Cause Solution The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out soon. The battery life is short. • You have used the camera in an extremely cold location. • The batteries are discharged. • The battery contacts or the terminals on the inner cover are dirty. • The batteries are exhibiting the "memory effect" (page 11). • The batteries are dead (page 78). • You are shooting/viewing images in an extremely cold location. • The batteries are not charged enough. • The batteries are dead (page 78). - p Install charged batteries (page 10). p Wipe any dirt off from them with a dry cloth (page 11). p To restore the batteries to their original condition, use them until they are fully drained before recharging them. p Replace the batteries with new ones. - p Charge the batteries (page 10). p Replace the batteries with new ones. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

61
Troubleshooting
Troubleshooting
If you experience trouble with your camera,
try the following solutions.
1
First check the items on the tables below.
If code “C:
ss
:
ss
” is displayed
on the LCD screen, the self-
diagnosis display function is
working (page 70).
2
Should your camera still not work
properly, open the waterproof cover to
press the RESET button using a fine-
tipped object, then close the cover and
turn on the power again. (All the settings
including date and time are cleared.)
3
Should your camera still not work
properly, consult your Sony dealer or
local authorized Sony service facility.
Batteries and power
RESET
button
Symptom
Cause
Solution
The battery remaining
indicator is incorrect, or
sufficient battery remaining
indicator is displayed but
the power runs out soon.
You have used the camera in an extremely cold
location.
The batteries are discharged.
The battery contacts or the terminals on the inner
cover are dirty.
The batteries are exhibiting the “memory effect”
(page 11).
The batteries are dead (page 78).
p
Install charged batteries (page 10).
p
Wipe any dirt off from them with a dry cloth (page 11).
p
To restore the batteries to their original condition, use them until
they are fully drained before recharging them.
p
Replace the batteries with new ones.
The battery life is short.
You are shooting/viewing images in an
extremely cold location.
The batteries are not charged enough.
The batteries are dead (page 78).
p
Charge the batteries (page 10).
p
Replace the batteries with new ones.
Troubleshooting