Sony DVP-F21 Operating Instructions - Page 52

Checking the audio signal format If you press DISPLAY twice during playback, the format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown below. Example • Dolby Digital 5.1 ch Rear (L/R) DOLBY DIGITAL 3 / 2 .1 Front (L/R) + Center LFE (Low Frequency Effect) • Dolby Digital 3 ch DOLBY DIGITAL 2 / 1 Front (L/R) Rear (monaural) • PCM (Stereo) Sampling frequency PCM 96kHz 24bit Quantized bit rate signals or the Dolby Digital sound's monaural rear audio signals. • LFE (Low Frequency Effect) signal Note If "DTS" is set to "OFF" in "AUDIO SETUP," the DTS track selection option will not appear on the screen even if the disc contains DTS tracks (page 73). About audio signals Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker. • Front (L) • Front (R) • Center • Rear (L) • Rear (R) • Rear (Monaural): This signal can be either the Dolby Surround Sound processed 52