Sony HCD-BX50BTi Operating Instructions - Page 11

Getting Started  Antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise.  Speakers Insert only the stripped portion of the speaker cords into the SPEAKER jacks.  Power Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). When carrying this system 1 Remove a disc to protect the CD mechanism. 2 Press FUNCTION +/ (or FUNCTION on the unit)  repeatedly to select the CD function. 3 Hold down VOL +  and DSGX  on the unit, and press   on the unit until "STANDBY" appears. 4 After "LOCK" appears, unplug the power cord. To use the remote Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries,  side first, matching the polarities shown below. Notes  With normal use, the batteries should last for about six months.  Do not mix an old battery with a new one or mix different types of batteries.  If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. To use the iPod Insert an iPod Dock Adapter into the unit's connector  before use. For details on the supplied iPod Dock Adapters, refer to the instructions supplied with the Dock Adapters. To remove the iPod Dock Adapter, pull it up with your fingernail or a flat object using the slot inside the adapter. Slot 11GB