Sony HCD-BX50BTi Operating Instructions - Page 17

Basic Operations, Continued

Get Sony HCD-BX50BTi - Compact Disc Receiver PDF manuals and user guides View all Sony HCD-BX50BTi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Basic Operations To erase all the pairing registration information 1 Press BLUETOOTH   on the unit. When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH  on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR . "Delete?" appears. 3 Press . "Complete!" appears and all the pairing information is erased. Note In order to connect with a Bluetooth device after performing this operation, you must enter the passkey again. Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. 1 Select the Bluetooth function. Press BLUETOOTH   on the unit. 2 Establish a connection from the Bluetooth device. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. Once the connection is established, the system display changes as follows: "Connect"  Name of the Bluetooth device 3 Start playback. Press  (or BLUETOOTH  on the unit) . Depending on the Bluetooth device, you may need to start up the AV software of the Bluetooth device beforehand. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . To check the address of a connected Bluetooth device Press DISPLAY  while the Bluetooth device name appears in the system display. The Bluetooth device address appears for 8 seconds. To cancel the connection with a Bluetooth device Press and hold BLUETOOTH  on the unit for about 2 seconds until "Disconnect" appears, or until the information on the display (device name, etc.) disappears. Other operations To Press Pause playback  (or BLUETOOTH  on the unit) . Stop playback  . Select a folder +/ . Select a file Find a point in Hold down / a file . Note These operations may not be available for certain Bluetooth devices. In addition, the actual operations may differ depending on the connected Bluetooth device.  Continued 17GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
1¶
GB
Basic Operations
To erase all the pairing registration
information
1
Press BLUETOOTH

on the
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH
on the
unit for about 2 seconds to put the
system in Bluetooth standby mode.
2
Press CLEAR
.
“Delete?” appears.
3
Press
.
“Complete!” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passkey again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP.
1
Select the Bluetooth function.
Press BLUETOOTH

on
the unit.
2
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
“Connect”
Name of the Bluetooth
device
3
Start playback.
Press
(or BLUETOOTH

on
the unit)
.
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
4
Adjust the volume.
Press VOLUME +/
(or VOL +/
on
the unit)
.
To check the address of a connected
Bluetooth device
Press DISPLAY
while the Bluetooth
device name appears in the system
display.
°e Bluetooth device address appears for
8 seconds.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
Other operations
To
Press
Pause playback
(or BLUETOOTH

on the unit)
.
Stop playback
.
Select a folder
+/
.
Select a file
/
.
Find a point in
a file
Hold down
/
.
Note
°ese operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Continued