Sony HCD-BX50BTi Operating Instructions - Page 18

Notes on connections with Bluetooth devices  If you cannot connect with a paired Bluetooth device, perform the pairing operation between the system and the Bluetooth device again.  Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device.  When BLUETOOTH   on the unit is pressed while connected to Bluetooth headphones, it may take some time until a connection is made to the system from another Bluetooth device.  Use the A2DP-capable or A2DP- and AVRCP-capable Bluetooth device with the system in a peer-to-peer environment. Tip Bluetooth devices that have been connected with this system in the past are registered with this system. When a Bluetooth connection is not currently established, you can easily connect the system to a Bluetooth device by pressing BLUETOOTH   on the unit. (Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established.) This function may not be available depending on the Bluetooth device you are using. If a connection cannot be made, the system returns to the standby mode. Listening to music on this system using Bluetooth headphones You can listen to music played on this system using your Bluetooth headphones over a wireless connection. Follow the procedure below to listen to music on this system with Bluetooth headphones. Pairing this system with Bluetooth headphones  Connecting to registered headphones  Playing music on this system For details about the operations of the Bluetooth headphones, also refer to the operation manual supplied with your Bluetooth headphones. 18GB