Sony HCD-EX5 Operating Instructions - Page 8
Replacing the battery in the remote, Setting the clock
View all Sony HCD-EX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Replacing the battery in the remote 1 Slide out and remove the battery case. 2 Insert a new lithium battery CR2025 with the + side facing up. A lithium battery CR2025 3 Slide the battery case back in. Tip When the remote no longer operates the system, replace the battery with a new one. Note If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion. Notes on lithium battery • Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. • Wipe the battery with a dry cloth to assure a good contact. • Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if you mistreated. Do not recharge, disassemble or dispose of in fire. Setting the clock 1 Turn on the system. 2 Press CLOCK/TIMER SET on the remote. The day indication flashes. 3 Press . or > on the remote repeatedly to set the day, then press ENTER/YES on the remote. The hour indication flashes. 4 Press . or > on the remote repeatedly to set the hour, then press ENTER/YES on the remote. The minute indication flashes. 5 Press . or > on the remote repeatedly to set the minuite, then press ENTER/YES on the remote. If you made a mistake Press TCURSOR or CURSORt on the remote repeatedly until the indication you want to change (day, hour, minuite) flashes, and then change the setting. To adjust the clock 1 Press CLOCK/TIMER SET on the remote. 2 Press . or > on the remote repeatedly to select "CLOCK SET?", then press ENTER/YES on the remote. 3 Do the same procedures as steps 3 to 5 above. 8GB