Sony HDW1800 Installation Manual - Page 8

1-4. Power Supply 1-4-1. Voltage and Power Requirements This unit's power line has a switching regulator. c Be sure to operate the unit within the range of following power voltage. Power voltage: AC 100 to 240 V ± 10 % Power frequency: 50 Hz or 60 Hz Power consumption: Maximum 170 W (With all of the presumed optional kits.) Rush current: 10 A (Power voltage 100 V) 33 A (Power voltage 240 V) n AC power supply is required a capacity which is commensurate with rush current. If the capacity of the AC power supply is not enough, the breaker of AC power of a supply side may operate or this unit may not operate normally. 1-4-2. Power Cord This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service Center. w Use the specified power cord only when connecting the AC power. Never use a injured power cord. For customers in the U.S.A. and Canada: 1 Power cord 125 V 10 A (2.4 m): ! 1-551-812-31 2 Plug holder (Brown): 3-613-640-01 1 2 AC inlet For customers in the United Kingdom: 1 Power cord 250 V 10 A (2.0 m): 2 Plug holder (Brown): ! 1-777-823-12 3-613-640-01 1 2 AC inlet 1-2 (E) For customers in European countries except the United Kingdom: 1 Power cord 250 V 10 A (2.0 m): 2 Plug holder (Brown): ! 1-551-631-15 3-613-640-01 1 2 AC inlet For customers in the China: 1 Power cord 250 V 10 A (1.8 m): 2 Plug holder (Brown): 1 2 ! 1-783-481-42 3-613-640-01 AC inlet If the unit is used in the area except above, please contact your local Sony Sales Office/Service Center. HDW-1800/D1800