Sony HT-CT390 Operating Instructions - Page 24

The system turns off when the TV is turned off.  Check the setting of "HDMI>" - "TVSTB" (page 17). When "TVSTB" is set to "ON", the system turns off automatically when you turn off the TV regardless of the input. The system does not turn off even when the TV is turned off.  Check the setting of "HDMI>" - "TVSTB" (page 17). To turn the system off automatically regardless of the input when you turn off the TV, set "TVSTB" to "ON". The TV must support the Control for HDMI function (page 18). For details, refer to the operating instructions of your TV. Sound No TV sound is output from the system.  Check the type and connection of the HDMI cable, optical digital cable, or analog audio cable that is connected to the system and the TV (refer to the supplied Startup Guide).  If your TV is compatible with Audio Return Channel, make sure the system is connected to an ARCcompatible HDMI input jack of the TV (refer to the supplied Startup Guide). If sound is still not output or if sound is interrupted, connect the supplied optical digital cable and set "AUD >" - "TV AU" to "OPT" (page 16).  If your TV is not compatible with Audio Return Channel, TV sound will not be output from the system even if the system is connected to the TV's HDMI input jack. To output TV sound from the system, connect the supplied optical digital cable (refer to the supplied Startup Guide).  If sound is not output from the system even if the system and TV are connected by optical digital cable or if the TV does not have an optical digital sound output jack, connect an analog audio cable (not supplied) and switch input of the system to "ANALOG" (page 10).  Switch input of the system to "TV" (page 10).  Increase the volume on the system or cancel muting.  Depending on the order in which you connect the TV and the system, the system may be muted and "MUTING" is displayed in the top panel display of the system. If this happens, turn on the TV first, then the system.  Set the speakers setting of the TV (BRAVIA) to Audio System. Refer to the operating instructions of your TV regarding how to set the TV. The sound is output from both the system and the TV.  Mute the sound of the system or the TV. No sound or only a very low-level sound of the device connected to the Bar Speaker is heard from the Bar Speaker.  Press  + and check the volume level (page 9).  Press  or  + to cancel the muting function (page 9).  Make sure the input source is selected correctly. You should try other input sources by pressing INPUT repeatedly (page 10).  Check that all the cables and cords of the system and the connected device are firmly inserted. No sound or only a very low-level sound is heard from the subwoofer.  Press SW + to increase the subwoofer volume (page 9). 24US