Sony HT-CT390 Operating Instructions - Page 27

Others, Reset - subwoofer not linking

Get Sony HT-CT390 PDF manuals and user guides View all Sony HT-CT390 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Additional Information Others The Control for HDMI function does not work properly.  Check the connection with the system (refer to the supplied Startup Guide).  Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV.  Wait a while, and then try again. If you unplug the system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again.  Make sure the devices connected to the system support the Control for HDMI function.  Enable the Control for HDMI function on the devices connected to the system. For details, refer to the operating instructions of your device.  The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: • Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices • Playback devices (Blu-ray Disc Player, DVD player, etc.): up to 3 devices • Tuner-related devices: up to 4 devices • Audio system (receiver/ headphone): up to 1 device (used by this system) If "PRTCT" appears in the top panel display of the Bar Speaker.  Press  to turn off the system. After the display turns off, disconnect the AC power cord (mains lead) then check that nothing is blocking the ventilation holes of the Bar Speaker. The top panel display of the Bar Speaker is not lit.  Press DIMMER to set the brightness to "BRIGHT" or "DARK", if set to "OFF" (page 9). Sensors of the TV do not work properly.  The Bar Speaker may block some sensors (such as the brightness sensor) and the remote control receiver of your TV, or the "emitter for 3D glasses (infrared transmission)" of a 3D TV that supports the infrared 3D glass system or the wireless communication. Move the Bar Speaker away from the TV within a range that allow those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions supplied with the TV. Reset If the system still does not operate properly, reset the system as follows. Be sure to use the touch keys on the Bar Speaker to perform this operation. 1 While holding INPUT, touch VOL - and  simultaneously for 5 seconds. "RESET" appears in the top panel display, and the settings of the menu and sound fields, etc. return to their initial status. 2 Disconnect the AC power cord (mains lead). 3 Connect the AC power cord (mains lead), then press  to turn on the system. 4 Link the system to the subwoofer (page 21). 27US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
27
US
Additional Information
The Control for HDMI function does not
work properly.
Check the connection with the
system (refer to the supplied
Startup Guide).
Enable the Control for HDMI
function on the TV. For details, refer
to the operating instructions of your
TV.
Wait a while, and then try again. If
you unplug the system, it will take a
while before operations can be
made. Wait for 15 seconds or
longer, and then try again.
Make sure the devices connected to
the system support the Control for
HDMI function.
Enable the Control for HDMI
function on the devices connected
to the system. For details, refer to
the operating instructions of your
device.
The type and number of devices
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC standard
as follows:
• Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
• Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to 3
devices
• Tuner-related devices: up to 4
devices
• Audio system (receiver/
headphone): up to 1 device (used
by this system)
If “PRTCT” appears in the top panel
display of the Bar Speaker.
Press
to turn off the system. After
the display turns off, disconnect the
AC power cord (mains lead) then
check that nothing is blocking the
ventilation holes of the Bar Speaker.
The top panel display of the Bar
Speaker is not lit.
Press DIMMER to set the brightness
to “BRIGHT” or “DARK”, if set to
“OFF” (page 9).
Sensors of the TV do not work properly.
The Bar Speaker may block some
sensors (such as the brightness
sensor) and the remote control
receiver of your TV, or the “emitter
for 3D glasses (infrared
transmission)” of a 3D TV that
supports the infrared 3D glass
system or the wireless
communication. Move the Bar
Speaker away from the TV within a
range that allow those parts to
operate properly. For the locations
of the sensors and remote control
receiver, refer to the operating
instructions supplied with the TV.
If the system still does not operate
properly, reset the system as follows.
Be sure to use the touch keys on the Bar
Speaker to perform this operation.
1
While holding INPUT, touch VOL –
and
simultaneously for
5 seconds.
“RESET” appears in the top panel
display, and the settings of the
menu and sound fields, etc. return
to their initial status.
2
Disconnect the AC power cord
(mains lead).
3
Connect the AC power cord (mains
lead), then press
to turn on the
system.
4
Link the system to the subwoofer
(page 21).
Others
Reset