Sony HT-CT790 Operating Instructions - Page 52
Device List], Bluetooth Standby], Bluetooth Codec - AAC], Wireless Playback Quality]
View all Sony HT-CT790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
output audio from the BLUETOOTH device. [Transmitter]: This system is in transmitter mode, which enables it to send audio to the BLUETOOTHcompatible headphones or speaker. If you switch the input of the system, "BT TX" appears on the front panel display. [Off]: The BLUETOOTH function is turned off and you cannot select the [Bluetooth Audio] input. Note You can connect to a BLUETOOTH device by using the One-touch function even if you have set [Bluetooth Mode] to [Off]. [Device List] Displays a list of paired and detected BLUETOOTH devices (SNK device) when [Bluetooth Mode] is set to [Transmitter]. [Bluetooth Standby] You can set the [Bluetooth Standby] so that the system can be turned on by a BLUETOOTH device even when the system is in standby mode. This function is only available when you set [Bluetooth Mode] to [Receiver] or [Transmitter]. [On]: The system turns on automatically when you request a BLUETOOTH connection from a paired BLUETOOTH device. [Off]: Off [Bluetooth Codec - AAC] This function is only available when you set [Bluetooth Mode] to [Receiver] or [Transmitter]. [On]: Enable AAC codec. [Off]: Disable AAC codec. Notes • You can enjoy high-quality sound if AAC is enabled and your device supports AAC. • When connecting BLUETOOTHcompatible headphones or speakers, this setting cannot be changed. [Bluetooth Codec - LDAC] This function is only available when you set [Bluetooth Mode] to [Receiver] or [Transmitter]. [On]: Enable LDAC codec. [Off]: Disable LDAC codec. Notes • You can enjoy more high-quality sound if LDAC is enabled and your device supports LDAC. • When connecting BLUETOOTHcompatible headphones or speakers, this setting cannot be changed. [Wireless Playback Quality] You can set the transmission data rate of LDAC playback. This function is only available when you set [Bluetooth Mode] to [Transmitter] and [Bluetooth Codec - LDAC] to [On]. [Auto]: The data transfer rate is automatically changed depending on the environment. If audio playback is unstable in this mode, use the other three modes. [Sound Quality]: The highest bit rate is used. Sound is sent in a higher quality; however, audio playback sometimes may become unstable when the link quality is not good enough. [Standard]: The middle bit rate is used. It balances both sound quality and playback stability. [Connection]: Stability is prioritized. Sound quality may be reasonable and connection status will most likely be stable. If the connection is unstable, this setting is recommended. [Wireless Surround Settings] This setting is for using wireless speakers (not supplied) as the surround speakers of the system. For details, see "Adding Rear Speakers (Wireless Surround)" (page 39). 52US