Sony KDS-50A2020 Operating Instructions - Page 40

Using the Menus Option 4:3 Default Select the default screen mode to use for 4:3 sources. Display Area Horizontal Center Vertical Center Vertical Size Description Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9 screen, keeping the original image as much as possible. Normal Select to display the 4:3 picture in its original size. Full Select to enlarge the 4:3 picture horizontally only, to fill the display area. Zoom Select to enlarge the picture horizontally and vertically to an equal aspect ratio that fills the wide screen. Off Select to continue using the current Wide Mode setting when the channel or input is changed. ✍ 4:3 Default is not available if Auto Wide is set to Off. ✍ If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off. Allows you to adjust the screen area displaying the picture. Normal Select to display the picture in the original size. -1/-2 Select to enlarge the picture to hide the edge of the picture. Allows you to move the position of the picture left and right. Press B/b and press to adjust. Allows you to move the position of the picture up and down. (Available only in Zoom.) Press V/v and press to adjust. Allows you to adjust the vertical size of the picture. (Available only in Wide Zoom and Zoom.) Press V/v and press to adjust. ✍ Size adjustment is especially useful for Wide Zoom picture conditions such as when news ticker information appears at the bottom or top of the screen. 40