Sony KF50XBR800 Operating Instructions - Page 82
Other Information, Programming the Remote Control - codes
UPC - 027242616028
View all Sony KF50XBR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Other Information Programming the Remote Control If you have video equipment that you want to control with the LCD projection TV's remote control, use the following procedures to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. From the "Manufacturer's Codes" listed on page 83, select the three-digit code number for the manufacturer's code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure. 1 Press FUNCTION repeatedly to select your desired input. 2 Press SAT/CABLE for five seconds. The indicator of the selected input flashes. 3 Input the three-digit manufacturer's code number. ✍ When no code number is input for 30 seconds or invalid or incorrect numbers are input, the remote control is reset to the normal TV remote control mode. Tips ❑ If more than one code number is listed, try entering them one by one until you come to the correct code for your component. ❑ If you enter a new code number, the code number you previously entered at that setting is erased. ❑ In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component's own remote control unit. RM-Y912 82