Sony KLV-S32A10 Instructions (SU-WL31 Wall-Mount Bracket) - Page 12
Step 6: Installing the TV on the Plate Unit, Connect the AC power cord
View all Sony KLV-S32A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
B Screw (+PSW5 × L16) Step 6: Installing the TV on the Plate Unit C Screw (+PSW5 × L16) Retighten two screws removed in 3 of procedure 1 in the screw holes at either end. D Screw (+PSW5 × L16) Mounting Hook Unit Mounting Hook Unit WARNING Be sure to complete the installation before connecting the AC power cord to the wall outlet. If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. Be careful not to stumble over the AC power cord or the TV, as you may hurt yourself. 1 Connect the AC power cord and the connecting cable(s) supplied with the TV to the TV. Connect the AC power cord and the connecting cable(s) to the connectors on the rear side of the TV. For details on connecting the AC power cord and the connecting cable(s), refer to the instruction manual of the TV. When you route the cord and the cable in the wall, feed them through the hole you bored (page 17). E Screw (+PSW5 × L16) Mounting Hook Unit Hole for cable routing Notes • You cannot connect the cables to the TV after installing it on the Plate Unit. • Subcontract the cable routing in the wall to licensed contractors. 12 (GB) Mounting Hook Unit