Sony KLV-S32A10 Instructions (SU-WL31 Wall-Mount Bracket) - Page 13
Install the TV onto the Plate, Unit., Slightly push the TV toward the Plate Unit - base
View all Sony KLV-S32A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 Install the TV onto the Plate Unit. 1 Insert the screws (+B5 × L12, supplied) for securing the Mounting Hook Unit into the screw holes on the outer left and right sides of the arm bases B, and then tighten them temporarily. 2 Hitch the upper hooks of the two Mounting Hook Units on to the support shafts of the stabilizer arms. 3 Place the lower hooks of the two Mounting Hook Units so that they touch the front side of the arm bases B. 4 Slightly push the TV toward the Plate Unit and upward, to hitch the lower hooks of the two Mounting Hook Units on to the arm bases B. 2 Arm base B Tighten the screws to halfway so that they do not protrude from the opposite side. Note If the temporarily attached screws for securing the Mounting Hook Unit protrude inside the arm bases, the lower hooks of the Mounting Hook Units cannot be fitted in. 4 3 5 Confirm the eight hooks are firmly hooked on the four shafts on the Plate Unit. 6 Firmly tighten the securing screws screwed in temporarily in step 1. WARNING Tighten the securing screws firmly (one each on the left and right arm bases). If the screws are not tightened enough, the TV could become detached from the Plate Unit and fall, causing damage and/or injury. 13 (GB)