Sony KV-32FV310 Operating Instructions (primary manual) - Page 13
Programming the Remote Control - problems
View all Sony KV-32FV310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
01US01COV-BR2.book Page 5 Wednesday, February 19, 2003 5:45 PM Using the Remote Control Programming the Remote Control In order to use your remote control with other equipment, you need to program your remote control. Use the following procedure to program the remote control. 1 Check the list of "Manufacturer's Codes" on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. 2 Press . ✍ The and button will flash when you press . 3 Press or button to indicate the type of component you want to program with the remote control. ✍ You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. 4 Use the 0 9 buttons to enter the three-digit manufacturer's code number. 5 Press . 6 To check if the code number works, aim the TV's remote control at the component and press on the green POWER button that corresponds with that component. If it responds, you are done. If not, try using another code listed for that manufacturer. ✍ If you have problems programming your remote control, see "Troubleshooting" on page 45. 5