Sony KV-32FV310 Operating Instructions (primary manual) - Page 26

01US01COV-BR2.book Page 18 Wednesday, February 19, 2003 5:45 PM Operating Instructions Connecting a TV, VCR, and Satellite Receiver 4 From 1 cable/ antenna 2 VCR Satellite receiver 3 5 Rear of TV 1 34 5 MONITOR AUDIO OUT (VAR/FIX) Y S VIDEO PB PR VIDEO VIDEO L (MONO) L (MONO) R R Video (yellow) Audio L (white) Audio R (red) 1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. 3 Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. 4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your VCR. 5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. ✍ To view from the satellite receiver or VCR, select the video input to which your satellite receiver or VCR is connected by pressing on the remote control. Using your TV with this connection This connection allows you to do the following: ❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5). ❏ Turn on your VCR to enable your satellite receiver to work with this connection. ❏ To activate your remote, press receiver. to operate your VCR or to operate your satellite ❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). 18