Sony LBT-LCD7Di Operating Instructions - Page 107
Additional Information, Troubleshooting, If the STANDBY indicator flashes, General
UPC - 027242757097
View all Sony LBT-LCD7Di manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Additional Information Troubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are connected correctly and firmly. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items. Are you using only the supplied speakers? Are the + and speaker cords short-circuited? Is anything blocking the ventilation holes on the rear of the system? After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. General The display starts flashing as soon as you plug in the power cord even though you have not turned on the system. Press DISPLAY once while the system is off. The demonstration disappears. "- -:- -" appears in the display. A power failure has occurred. Set the clock (page 32) and timer settings (page 97) again. The system does not turn on. Is the power cord plugged in? The clock or timer setting is canceled. The power cord is disconnected or a power failure occurred. Redo "Setting the clock" (page 32). If you have set the timer, redo "Using the timer" (page 97). There is no sound. Press VOLUME + repeatedly (or turn MASTER VOLUME on the unit clockwise). The headphones are connected to the PHONES jack. Additional Information Continued 107GB