Sony LBT-LCD7Di Operating Instructions - Page 126
Specifications, Main unit, Amplifier
UPC - 027242757097
View all Sony LBT-LCD7Di manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
On heat buildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. In case color irregularity is observed on a nearby TV screen With the magnetically shielded type of speakers, the speakers can be installed near a TV set. However, color irregularity may still be observed on the TV screen depending on the type of your TV set. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. IMPORTANT NOTICE Caution: If you leave a still video image or on-screen display image displayed on your TV for an extended period of time via this system, you risk permanent damage to your TV screen. Projection TVs are especially susceptible to this. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. Specifications Main unit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (LBT-LCD7Di The United States model only) With 6 ohm loads, both channels driven, from 120 10,000 Hz; rated 85 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 800 milliwatts to rated output. Amplifier section The following measured at AC 120 V, 60 Hz (North American model) The following measured at AC 230 V, 50/60 Hz (European model) The following measured at AC 240 V, 50/60 Hz (Australian model) MHC-GZR33Di Power output (rated): 105 W + 105 W (at 6 Ω, 1 kHz, 1% THD) RMS output power (reference): 180 W + 180 W (per channel at 6 Ω, 1 kHz, 10% THD) LBT-LCD7Di Power output (rated): 105 W + 105 W (at 6 Ω, 1 kHz, 1% THD) RMS output power (reference): 180 W + 180 W (per channel at 6 Ω, 1 kHz, 10% THD) 126GB