Sony LBT-LCD7Di Operating Instructions - Page 30
Press, repeatedly to select, the desired setting, then press, ENTER., START, then press ENTER.
UPC - 027242757097
View all Sony LBT-LCD7Di manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
7 Press or repeatedly to select the desired setting, then press ENTER. The default setting is underlined. OFF: Outputs interlace signals. Select this setting when: your TV does not accept progressive signals. your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks. ON: Outputs progressive signals. Select this setting when: your TV accepts progressive signals. your TV is connected to the COMPONENT VIDEO OUT jacks. When you select "ON," the confirmation display appears. Follow the steps below. 8 Press or repeatedly to select "START," then press ENTER. The system outputs the progressive signal for 5 seconds. Check that the screen is displayed correctly. 9 Press or repeatedly to select "YES." The system outputs the progressive signal. When you select "NO," the system does not output the progressive signal. Note There would be no image on your TV or the image is not clear if your setting does not match your TV or connection. 30GB