Sony MEX-BT39UW Operating Instructions - Page 26

Music streaming Listening to music from an audio device You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Turn down the volume on this unit. 2 Press (SOURCE/OFF) repeatedly until "BT AUDIO" appears. 3 Operate the audio device to start playback. 4 Adjust the volume on this unit. Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 1 Start playback of the Bluetooth audio device at a moderate volume. 2 Set your usual listening volume on the unit. 3 Press the select button. 4 Rotate the control dial until "BTA VOL" appears, and rotate the volume control dial to adjust the input level ("+18dB" - "0dB" - "- 8dB"). Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.) To Repeat play Shuffle play Skip albums Play Pause Skip tracks Reverse/ Fast-forward 26 Do this Press (1) (REP)*1 Press (2) (SHUF)*1 Press (3)/(4) (ALBUM -/+) [press once for each album] Press (6) (PAUSE)*2 on this unit. Press (6) (PAUSE)*2 on this unit. Press SEEK -/+ (./>) [press once for each track] Press and hold SEEK -/+ (./>) [hold to desired point] *1 Press repeatedly until the desired setting appears. *2 Depending on the device, it may be necessary to press twice. Operations other than the above should be performed on the audio device. Notes • Depending on the audio device, information, such as title, track number/time, playback status, etc., may not be displayed on this unit. The information is displayed during Bluetooth Audio playback only. • Even if the source is changed on this unit, playback of the audio device does not stop. Tip You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music. Initializing Bluetooth Settings You can initialize all the Bluetooth-related settings from this unit. 1 Press and hold (SOURCE/OFF) for 1 second to turn off the power. 2 Press and hold the select button. The menu list appears. 3 Rotate the control dial to select "BT INIT," then press it. The confirmation appears. 4 Rotate the control dial to select "INIT- YES," then press it. "INITIAL" flashes while initializing the Bluetooth settings. "COMPLETE" appears when initializing has finished. Note When disposing of this unit, preset numbers should be deleted with "BT INIT."