Sony MEX-BT39UW Operating Instructions - Page 30
Other functions, Using optional equipment, Auxiliary audio equipment - stereo
View all Sony MEX-BT39UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
ZAP TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 15 seconds)," "Z.TIME-3 (about 30 seconds)." ZAP BEEP (Zappin Beep) Has the beep sound between track passages: "ON," "OFF." LPF FREQ (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency: "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." LPF SLOP (Low Pass Filter Slope) Selects the LPF slope: "1," "2," "3." SW PHASE (Subwoofer Phase) Selects the subwoofer phase: "NORM," "REV." HPF FREQ (High Pass Filter Frequency) Selects the front/rear speaker cut-off frequency: "OFF," "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." HPF SLOP (High Pass Filter Slope) Selects the HPF slope (effective only when HPF FREQ is set to other than "OFF"): "1," "2," "3." LOUDNESS (Dynamic Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." BTM (page 15) AUTO ANS*1 (Auto Answer) Answers an incoming call automatically. - "OFF": to not answer automatically until (handsfree) is pressed. - "1": to answer automatically after 3 seconds. - "2": to answer automatically after 10 seconds. RINGTONE*1 Uses the ringtone of this unit or the connected cellular phone: "1 (this unit)," "2 (cellular phone)." BT INIT*1 (Bluetooth Initialize) (page 26) *1 When the unit is turned off. *2 When FM is received. Other functions Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below: Connecting the portable audio device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit. Connecting cord* (not supplied) * Be sure to use a straight type plug. Adjusting the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE/OFF) repeatedly until "AUX" appears. After that, "AUX FRONT IN" appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Adjust the input level (page 27). 30