Sony MEX-R1 Operating Instructions - Page 23
Changing the angles, DOLBY DIGITAL
View all Sony MEX-R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
When "DOLBY DIGITAL" is applied, the program format name and channel numbers appear as follows: Example: Dolby Digital 5.1 ch Rear component × 2 DOLBY DIGITAL 3 / 2 . 1 Front component × 2 + Center component × 1 LFE component × 1 *1 "PCM," "DTS," or "DOLBY DIGITAL" appears depending on the disc. *2 Appears only when the "DOLBY DIGITAL" format is applied. To turn off the Play mode menu Press (SETUP). Tip For Dolby Digital and DTS, "LFE" is always enclosed in a solid line regardless of the LFE signal component being output. Adjusting the audio output level - DVD level adjustment The audio output level for DVD video differs depending on the recorded audio format (PCM, Dolby Digital, or DTS). You can adjust the output level of PCM, Dolby Digital or DTS separately to reduce the volume level differences between disc and source. 1 Press (SYSTEM MENU). 2 Press M/m repeatedly to select "DVD LVL," then press (ENTER). 3 Press , to set to "ADJ-ON," then press (ENTER). 4 Press