Sony MZ-R700 Operating Instructions - Page 27
Recording without overwriting existing material, While the recorder is stopped, press ENTER.
View all Sony MZ-R700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
• Synchro-recording cannot be done if the connecting cord is not an optical cable, or if the cable is connected to the MIC (PLUG IN POWER) jack. • You cannot manually change the recording mode or the recording level during synchro-recording. Recording without overwriting existing material If you wish to avoid overwriting the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents.
27
•
Synchro-recording cannot be done if the connecting cord is not an optical
cable, or if the cable is connected to the MIC (PLUG IN POWER) jack.
•
You cannot manually change the recording mode or the recording level
during synchro-recording.
Recording without overwriting existing
material
If you wish to avoid overwriting the current contents of an MD, do
the following procedure. All new material will then be recorded from
the end of the current contents.
1
While the recorder is stopped, press ENTER.
2
Press
<
MENU
,
repeatedly until
“
REC-Posi
”
flashes in the
display, and then press ENTER.
3
Press
<
MENU
,
repeatedly until
“
From End
”
flashes in the
display, and then press ENTER.
To start recording from the current point
Select
“
From Here
”
in step 3.
<
MENU
,
ENTER