Sony MZ-R700 Operating Instructions - Page 57
No sound comes through the headphones/earphones., An MD is not played from the first track.
View all Sony MZ-R700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
"NO SIGNAL" appears in the display when recording from a portable CD player. • There is no digital signal from the portable CD player. - When recording digitally from a portable CD player, use AC power adaptor and disable the anti-skip function (such as ESP) on the CD player (page 16). There is no recording after a recording operation. • The AC power adaptor was unplugged or a power outage occurred during recording. The lid does not open. • The power sources have been disconnected during recording or editing, or the battery have been exhausted. - Set the power sources again, or replace the exhausted battery with new ones. No sound comes through the headphones/earphones. • The headphones/earphones plug is not firmly connected. - Plug in the plug of the headphones/earphones firmly to the remote control. Plug in the plug of the remote control firmly to i. • Volume is too low. - Adjust the volume by pressing VOL +/-. Volume cannot be turned up. • AVLS is on. - Set AVLS to "AVLS OFF" (page 37). An MD is not played from the first track. • Disc playing stopped before it came to the last track. - Press . repeatedly to go back to the beginning of the disc, and restart playing after checking the track number in the display. Playback sound skips. • The recorder is placed where it receives continuous vibration. - Put the recorder on a stable place. • A very short track may cause sound to skip. Sound has a lot of static. • Strong magnetism from a television or such device is interfering with operation. - Move the recorder away from the source of strong magnetism. 57