Sony NEX-3N α Handbook - Page 130

Table of contents Sample photo AF Micro Adj. Allows you to adjust and register an autofocused position for each lens, when using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately). 1 MENU t [Setup] t [AF Micro Adj.]. 2 [AF Adjustment Setting] t [On]. 3 [amount] t desired value t OK. AF Adjustment Setting amount Clear Sets whether or not to use the [AF Micro Adj.] function. Select [On] to use the [AF Micro Adj.]. Allows you to select an optimum value between -20 and +20. Selecting a larger value shifts the autofocused position away from the camera. Selecting a smaller value shifts the autofocused position closer to the camera. Clears the value you set. Notes • It is recommended that you adjust the position under actual shooting conditions. • When you attach a lens for which you have already registered a value, the registered value appears on the screen. [±0] appears for lens for which a value has not yet been registered. • If [-] is displayed as the value, then a total of 30 lenses have been registered and no new lens can be registered. To register a new lens, attach a lens for which the registration can be erased, and set its value to [±0], or reset the values of all the lenses using [Clear]. • Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.] with other brands of lenses, the registered value may be affected. Do not perform [AF Micro Adj.] with an unsupported lens. • You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konika-Minolta lens of the same specification. Menu Index 130GB