Sony NEX-3N α Handbook - Page 181
The setting is reset without the resetting operation., The camera does not work properly.
View all Sony NEX-3N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Table of contents Sample photo Menu Index The setting is reset without the resetting operation. • The battery pack was removed when the power switch was set to ON. When removing the battery pack, make sure the camera is turned off and the access lamp is not lit. The camera does not work properly. • Turn off the camera. Remove the battery pack and insert it again. If the camera is hot, remove the battery pack, and allow it to cool down before trying this corrective procedure. • If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power cord and turn on the camera again. If the camera does not work after trying these solutions, consult your Sony dealer or local authorized Sony service facility. "--E-" appears on the screen. • Remove the memory card, and insert it again. If the problem persists even after performing this procedure, format the memory card (page 154). 181GB