Sony NV-U70 Quick Start Guide - Page 20
Specifications, Main unit, Cradle, Optional accessories
UPC - 027242687875
View all Sony NV-U70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1 Switch off the main power by sliding the POWER switch to the OFF position. 2 Remove the jack cover (page 11). 3 Remove the 2 screws on the underside of the unit using a screwdriver. 4 Slide the rear cover, then lift to open. 1 2 5 Remove the battery. 6 Insulate the connector terminal by wrapping with a tape. Notes on the lithium-ion battery • Keep the battery out of the reach of children. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. 20 RECYCLING LITHIUM-ION BATTERIES Lithium-ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-8228837, or visit http://www.rbrc.org/. Caution: Do not handle damaged or leaking Lithium-ion batteries. Specifications Main unit Operating temperature: 5 - 45 ºC (41 - 113 ºF) Power requirements: DC 5 V (from supplied AC power adapter) Connection terminals: Cradle connector DC IN 5V jack USB jack External GPS antenna jack Speaker: 2-way speaker Consumption current: Approx. 0.5 A Dimensions: Approx. 104.7 × 87.5 × 42.9 mm (4.1 × 3.5 × 1.8 in) (w × h × d) Mass: Approx. 310 g (11 oz) Monitor System: Transmissive liquid crystal display Drive system: a-Si TFT active matrix system Dimensions: 3.5 in (4:3) 70.1 × 52.6, 87.6 mm (2.8 × 2.1, 3.5 in) (h × v, d) Segment: 230,400 (960 × 240) dots Cradle Operating temperature: 5 - 45 ºC (41 - 113 ºF) Power requirements: DC 5.2 V (from supplied 12 V car battery adapter (negative ground)) Connection terminals: Unit connector DC IN 5.2V jack Optional accessories External GPS Antenna: VCA-41 Car Cradle Kit: NVA-CU3 Design and specifications are subject to change without notice. • Lead-free solder is used for soldering. • Halogenated flame retardants are not used in the certain printed wiring boards. • Use of rechargeable lithium ion batteries. • Corrugated cardboard is used for the packaging cushions. • VOC (Volatile Organic Compound)-free vegetable oil based ink is used for printing the carton. • This manual is printed on 100 % recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.