Sony NV-U70 Quick Start Guide - Page 8
If you want to fix the cradle on the, windshield permanently, If the bottom of the cradle touches - battery
UPC - 027242687875
View all Sony NV-U70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
If you want to fix the cradle on the windshield permanently The suction cup is affected in high/low temperatures and may come off. If you want to fix the cradle on the windshield permanently, use the supplied adhesive tape on the suction cup. If the bottom of the cradle touches the dashboard Attach the supplied pad for protection. Cut the pad to the appropriate size before attaching. Note The adhesive tape is difficult to remove once applied. 2 Connect the cradle to the car cigarette lighter socket. 1 Plug the car battery adapter into the DC IN 5.2V jack at the rear of the cradle. DC IN 5.2V 3 Align the 2 slots on the underside of the unit with the tabs on the cradle, then push to snap the unit into place. Be sure the unit is securely locked in the cradle (2 clicks). 1st click 2nd click 2 Insert the other end of the car battery adapter fully into the car cigarette lighter socket. LED* 4 Loosen the center knob, fine adjust the angle so you can view the monitor properly, then retighten. * Lights up when you turn the ignition on after installation. Note Depending on the size or shape of the cigarette lighter socket, connection may not be possible. To loosen To tighten Tip You can also connect the unit to an outlet using the supplied AC power adapter. 8