Sony RM-VL710 Operating Instructions - Page 29
Programming a series of commands to on the Component Select buttons
UPC - 027242663817
View all Sony RM-VL710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Programming a series of commands to on the Component Select buttons As with the SYSTEM CONTROL buttons, you can also program a series of operating commands for the Component Select buttons (up to 16 steps). To execute the commands programmed on a Component Select button by the System Control function, press the button for more than 2 seconds. 1,3 SET POWER TV VCR CBL DVD AMP 123 4 56 7 89 0 ENT 2 Example: To program the procedure on page 26 for the VCR Component Select button 1 Press and while holding SET, press the VCR Component Select button. The SET indicator and the VCR Component Select button lights turn on. SET TV VCR CBL DVD AMP If a Control Program function (Component Macro) has already set on the button, the button flashes twice. The setting procedure is automatically canceled. 2 Set the Control Program function. With this example, press the buttons in sequence as below: VCR POWER AMP 1 POWER Notes • When you press the button for less than 2 seconds, it works as the normal Component Select button, and the programmed Function function does not work. • See also "Tips for programming the System Control functions" on page 28. You can program up to 16 consecutive steps to on each of the Component Select buttons, including the initial step of pressing a including the first step to select a Component Select button. 3 Press SET to complete the programming. The VCR Component Select button light turns off. Continued 29