Home » Sony Manuals » Remote Controls » Sony RM-VL710 » Manual Viewer

Sony RM-VL710 Operating Instructions - Page 9

Press the Component Select, button for the desired, component., Press the Number buttons - component code numbers

UPC - 027242663817

Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

3 Press the Component Select button for the desired component. The selected Component Select button lights up, and all other button lights turn off. TV VCR CBL DVD AMP 4 Press the Number buttons to enter the four-digit component code number. 5 Press ENT. The Component Select button light turns off. TV TV If the Component Select button flashes five times before turning off, it means that the setup is incomplete. Start over from Step 2. Notes • If you press a component code number that is not on the table in the supplied "Component Code Numbers", or if you press a button in the wrong order, the Component Select button flashes five times, and then turns off. Check the component code number, and try setting it again. • If you don't input anything into the Commander within 20 seconds between each step, the setup procedure will be canceled. To set the code, start over from Step 2. • If you press SET while setting the component code, all code numbers will be lost, and the setup procedure will be canceled. Start over from Step 2. To cancel setup, press SET. Continued 9

Section	Page
Getting Started	6
Installing the Batteries	6
When to replace the batteries	6
Location of Controls	7
Basic Operations	8
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	8
Setting a component code	8
Checking if the code number works	10
Setting a component code by the Search function	11
Operating Your Components with the Remote Commander	12
To control the volume	13
Programming signals of another remote control — Learning Function	14
For accurate Learning	17
Programming remote control signals to the Component Select buttons	18
Changing or erasing the function of a “learned” button	20
Notes on programming the signals for an airconditioner	22
Advanced Features	23
Controlling the Volume of Visual Components Connected to an Audio System	23
Adding an Extra Function to the Component Select Buttons	25
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	25
Executing a Series of Commands — System Control Functions	26
To clear programmed commands	28
Programming a series of commands to on the Component Select buttons	29
To clear programmed commands	30
Assigning Other Components to the Component Select Buttons	30
Copying the settings of a Component Select button to another button	31
Using Other Functions	32
Locking the Controls — Hold Function	32
Erasing all settings — To reset the Commander to its factory settings	33
Additional Information	34
Precautions	34
Maintenance	34
Specifications	34
Troubleshooting	35
Appendix	37
Table of Preset Functions	37
TV	37
VCR	38
CBL (Cable box)	38
SAT	39
DVD	39
DVR (Digital video recorder)	40
CD	41
MD	41
DAT	41
DECK	41
AMP	42
Digital Cable Box	42