Sony STR-DE1075 Primary User Manual - Page 40
Adjustments using the SET UP button, MULTI CH 1 and 2.
View all Sony STR-DE1075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Adjustments using the SET UP button The SET UP button allows you to make the following adjustments. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings Parameter Initial setting 6.1CH DECODING AUTO MULTI CH (1 or 2) NONE S.FIELD LINK ON A1 AUTO POWER ON AUTO FUNCTION ON 2ND ROOM SP1) OFF COMMAND MODE AV1 OSD COLOR OSD H.POSITION 4 OSD V.POSITION 4 1) Only when the center or surround back speaker is set to "2ND ROOM". x 6.1ch Matrix (6.1CH DECODING) According to the setting, the receiver decodes and downmixes the surround back signals to the surround speakers for 6.1 channel encoded sources. This parameter lets you enjoy the appropriate surround sound from the surround channels. • You can set this parameter using 6.1CH DECODING on the front panel. • When set to "AUTO", the receiver performs 6.1 channel matrix decoding only if 6.1 channel signals decode flag is ON. • When set to "ON", the receiver performs 6.1 channel matrix decoding only if the surround signals are 2 channel, regardless of the 6.1 channel decode flag. • When set to "OFF", the receiver does not perform 6.1 channel matrix decoding. • During "A.F.D.", this parameter is always set to "AUTO", and you cannot change the setting. • When the 6.1 channel matrix decoding is performed and the surround back speaker is set to "NO", you can enjoy the surround back signals with virtual 3D technology, even without an actual surround back speaker (the box around SB does not light up). If the surround back speaker is set to "YES", the surround back signals are output through the actual speaker (SB and the box lights up). x Multi channel assignment (MULTI CH 1 or 2) Lets you assign a function to MULTI CH 1 or 2. You cannot assign TUNER or PHONO. You cannot assign the same function to both MULTI CH 1 and 2. x Sound field link (S.FIELD LINK) Lets you apply the last selected sound field to a program source whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again. 40