Sony STR DG810 Instruction manual - Page 34

8: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. TV RM SET UP AV ?/1 ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER AUX DMPORT RECEIVER 1 2CH A.F.D. MOVIE MUSIC CATEGORY SLEEP MODE D.TUNING AUTO CAL 123 456 7 - /- - CLEAR >10 GUIDE 89 0/10 ENTER MEMORY DISPLAY V B 3-6 < B v 2 RETURN/ EXIT MENU OPTIONS TOOLS - CATEGORY + REPLAY ADVANCE .< > TUNING - TUNING + m H M DISC SKIP X x TV VOL TV CH MASTER VOL PRESET MUTING MASTER VOL +/- DVD 1 Press RECEIVER. The RECEIVER indicator lights up and receiver operation is activated. 2 Press MENU. "1-LEVEL" appears on the display. 3 Press menu. or b to enter the 4 Press V/v repeatedly to select "T. TONE". 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround back t Surround left t Sub woofer 7 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 43). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display during adjustment. 8 Repeat steps 1 to 6 to select "T. TONE N". You can also press any input buttons. The test tone turns off. 34US