Sony STR DG810 Instruction manual - Page 49
CNT SPK Center speaker, SUR SPK Surround speakers, SB SPK Surround back, speaker
UPC - 027242705647
View all Sony STR DG810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Amplifier Operations x CNT SPK (Center speaker) • NO If you have not connected a center speaker, select "NO". The sound of the center channel will be output from the front speakers. • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer. • LARGE If you connect a large speaker that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the center speaker to "LARGE". x SUR SPK (Surround speakers) The surround back speaker will be set to the same setting. • NO If you have not connected surround speakers, select "NO". • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the surround channel bass frequencies from the sub woofer or other speaker that is set to "LARGE". • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the surround speakers to "LARGE". x SB SPK (Surround back speaker) When the surround speakers are set to "NO", the surround back speaker is also automatically set to "NO" and the setting cannot be changed. • NO If you have not connected a surround back speaker, select "NO". • YES If you connect a surround back speaker, select "YES". Tip The "LARGE" and "SMALL" settings for each speaker determine whether the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other "LARGE" speakers. However, since bass sounds have a certain amount of directionality, it is best not to cut them, if possible. Therefore, even when using small speakers, you can set them to "LARGE" if you want to output the bass frequencies from that speaker. On the other hand, if you are using a large speaker, but prefer not to have bass frequencies output from that speaker, set it to "SMALL". If the overall sound level is lower than you prefer, set all speakers to "LARGE". If there is not enough bass, you can use the equalizer to boost the bass levels. For details, see page 40. x FL DIST. (Front left speaker distance) x FR DIST. (Front right speaker distance) Lets you set the distance from your listening position to the front speakers (A). If both front speakers are not placed an equal distance from your listening position, set the distance to the closest speaker. continued 49US