Sony XAV-602BT Operating Instructions 1 - Page 23

1 Connect the iPhone to the USB port, or Android phone via the BLUETOOTH function. 2 Launch the App Remote application. 3 Press HOME, then touch [App Remote]. Connection to the iPhone/Android phone starts. For details on operation of the iPhone/Android phone, see the help of the application. If the device number appears Make sure that the same numbers are displayed (e.g., 123456) in this unit and the mobile device, then press MENU on this unit and select Yes on the mobile device. To terminate connection Touch in the upper right of the display. Duplicating the Smartphone's Display (MirrorLink™) MirrorLink™ compatibility depends on smartphones and its application. For details on compatible models, refer to the compatibility list on the support site on the back cover. Notes on using the MirrorLink™ function  Your smartphone needs to support the MirrorLink™ function.  Depending on the smartphone, you may need to download an application to use the MirrorLink™ function.  Available operations differ depending on the smartphone. Refer to the manual supplied with the smartphone, or consult the manufacturer of the smartphone for details. 1 Connect your smartphone to the USB port. 2 Press HOME, then touch [MirrorLink™]. The smartphone's display appears on the display of the unit. Touch and control the applications in the same way as you do on your smartphone. Tip Setting [Receiver Audio Playback during MirrorLink™] to [ON] allows the unit to playback an audio source under the MirrorLink™ function (page 25). This setting is useful when you use a navigation application on your smartphone via the MirrorLink™ function. Note For your safety, when the parking brake is not engaged, some smartphone screen content may not be displayed on the unit. Enjoying Different Sources in Front and Rear (Zone × Zone) You can simultaneously enjoy different sources in the front and rear of the car. Selectable sources for this unit (front) and the rear monitor (rear) are indicated below. Front: Any source. Rear: Disc inserted in this unit. 1 Press HOME, then touch [Settings]. 2 Touch , then touch [Zone × Zone]. 3 Touch [ON]. To operate the source in the front, use the touch panel and buttons on the unit. To operate the source in the rear, use the remote commander. To deactivate Zone × Zone Press OFF on the unit/remote commander or select [OFF] in step 3 above. Notes  The Zone × Zone function disables remote commander operation of the source in the front.  The following buttons on the remote commander become inactive under the Zone × Zone function: SRC, MODE, ATT, VOL +/-, CLEAR, number buttons.  The following settings become inactive under the Zone × Zone function:  EQ7 / Subwoofer Level Adjust (page 27)  Balance / Fader Level Adjust (page 27)  Listening Position (page 27)  CSO (page 18)  HPF, LPF (page 28)  Rear Bass Enhancer (page 27) Enjoying high quality image (XAV-712HD only) The unit automatically selects the HDMI in/MHL in as the source when the MHL device is connected to the unit, and [Auto Input Change(MHL)] is set to [ON] (page 30). 1 Connect a device via the supplied HDMI or MHL connection cable. Use the appropriate cable for your device. Notes  Do not disconnect the device during playback.  The MHL connection cable can be used as a power source for recharging the connected device's battery when the ignition switch is turned to the accessory position.  To connect an iPod via the HDMI connection cable, Apple Digital AV Adapter or Lightning Digital AV Adapter is required. 23GB